PANZER 3: EMERALD TWO TONE EDITIONS ARE SPECIAL ORDERS FOR JUNE 2017. PICTURES REFERENCED IN THE LISTING SHOW INTERNAL BUILD DETAILS, FINAL BUILD DETAILS, AND EXAMPLES ONLY.
THE TOP IS EMERALD GREEN WHILE THE BASE IS BLACK SANDTEX!
This is a kit only setup, while it comes with all specialty parts that makes the Panzer Fight Stick 3 awesome, its not complete and requires assembly. Please read down below for further details.
The pictures may show completely built out stick for reference.
Introducing the Panzer Fight Stick 3 Korean Edition
The third Panzer Fight Stick is the culmination of 4 years of Fight Stick design and inputs from the community. I have taken elements from every iteration of the Panzer lineup and incorporated them into the perfect Panzer Fight Stick. It features: the OG's size, the Widebody's Plexi Top, the Korean Edition's Feet, the 2.0's EZ BUILD ("System of Systems") concept and a few new features. The Korean variant features a higher deck height of 2.5" to accomodate the deeper body of the Korean levers and a bolt in pattern to match.
More Auxiliary Functions. When coupled with the Brook Universal Fighting Board, your fight stick build is usually limited due to not having enough buttons or cutouts. The Panzer 3 allow you to use START, SELECT, HOME, TOUCHPAD CLICK, L3, and R3. Additionally, using the Cherryâ„¢ toggle switch you can shift your lever to Left Analog Stick Mode, Right Analog Stick Mode, or Direction Pad Mode with ease.
Front Button Lock. All Panzer Fight Stick 3's feature an included Cherryâ„¢ toggle switch that disables or "locks" the front buttons. This MECHANICAL kill switch prevents accidental bumps or presses that can cause you to lose a match. In my opinion, this is the best way to disable those buttons as the software enabled locks used by most Fight Sticks can fail. The front panel lock can lock out the LS/RS/DP mode switch as well by setting the internal switch to the appropriate position.
Wide Sega Candy Cabinet Influenced Layout. Today's mass marketed fight sticks all use the same Vewlix inspired layout. It's not ergonomic and can make deadly match ending combos unattainable. The curved feel of the 2P layout on Sega's Candy Cabinets makes all buttons easier to hit due to them matching the natural curve of your fingers. Additionally, the lever is spaced to 95mm instead of the usual 59mm since you don't have to share space with a friend sitting right next to you at a cabinet.
Strength. Each Panzer Fight Stick 3 is constructed with 14 gauge cold rolled steel and then powder coated. This ensures that the stick is sturdy and the finish is scratch resistant offering years quality use.
The Panzer Fight Stick 3 features the Jasen's Customs unique EZ BUILD system creating an environment where everyone can build their fight stick quickly and cleanly. No special tools or skills required. Each button, joystick, and board plugs into each other cleanly and neatly with ribbon cables or custom designed wiring harness. The best part? They are all included! An average build can be accomplished within 30 minutes and it will look great every time. Each Panzer Fight Stick 3 includes one main PCB that links the front facing LOCK switch, RS/DP/LS switch, all buttons and the PCB you chose together and makes connection to a Brook Universal Fighting Board or PS360+ a piece of cake.
Everyone has a PS3, PS4, XBOX 360, or XBOX ONE! If you have one you bet your buddy has the other. Why would you want a stick that only works on one or the other? Don't give up your home field advantage by using someone else's gear. I wanted a stick that could work on everything possible, hencethe Panzer 3 was designed around the Brook Universal Fighting Board and the PS360+ as the brain for console and PC gaming; both proven pieces of tech that the community adores. You can order your Brook Universal Fighting Board with the kit and it will come with all required headers pre-soldered!
- Main Case
- The JCC EZ BUILD system. Internal USB cable, main common PCB, internal wiring. Internal wiring accomodates standard Japanese levers and buttons including the popular Hori Hayabusa Optical.
- Internal Wiring include two lever cables. One supports a standard 5 pin connector, the other adapts it to the Korean edition body using .187" quick disconnects.
- Acrylic Lever Spacer
- Neutrik USB Port
- Neutrik Gasket
- External USB Cable
- Plexi Cover
- 2x Cherryâ„¢ Rocker Switches
- All required hardware
- All required connectors for the Brook Universal Fighting Board or PS360+
- *** If you purchase the Brook UFB with the PFS3 Kit, the connectors are presoldered to the board making this 100% plug and play only! ***
What do you need to provide?
Get your Panzer 3 parts from my friends over at ArcadeShockï¿½ or Paradise Arcadeï¿½ Just click there logo to visit.
- Brook Universal Fighting Board (if not purchased with the kit)
- Lever (Crown CWJ-303N, CWL-306 or Myoungshun Fanta )
- 8x 30mm Action Buttons
- 6x 24mm Auxiliary Buttons
Please find all build information, to include videos and a handy PDF under the "TECHNICAL SPECS
EZ Build Install